A drive pinion and its mounting plate off a CNC axis, resting on the machine bed with old grease on the teeth

Blog

Straight answers from inside the machine.

What I get rung about most, written down properly: the faults, the warning signs and what a repair really involves.

Close-up of a worn black vacuum pod on a CNC machine rail, its rubber top seal cracked and covered in sawdust, with a panel resting on the pods behind

Vacuum and pods

SCM CNC losing vacuum? The usual causes and what to check

Panels creeping, parts moving mid-cut, a vacuum gauge that reads lower than it did last month. Here is where the air is usually getting in, what you can safely look at yourself, and when it's time to ring.

30 Oct 2026 · 7 min read

Machine down?

07904 610916

Ring Paul. Tell him the make, the model and what it's doing.

Or ask him to ring you back

Keeping your machines running strong